Applications

• Cracks in masonry and other solid building materials; interior connection joints with low movement
• Window sill joints
• Interior connection joints between windows, doors, stairs, ceilings and walls

Advantages

1. Strong hold on absorbent substrates for a secure, economical seal
2. Paintable and plasterable once cured, for a clean finish with standard paints and plasters
3. Water-based with a neutral odor — suited to confined spaces

Product features

• No odor, zero formaldehyde
• No shrinkage after curing; cured surface can be painted over
• Weather resistance and durability of a polyurethane sealant, with strong resistance to joint movement
• Good adhesion, low smudging, low viscosity
• Bonds well to glass, metal and most common substrates

Scope of application

• Indoor and outdoor window-frame and wall seam sealing
• All types of door-frame and wall joint sealing
• Concrete joints and other construction joint sealing

Directions for use

1. Surfaces must be clean, dry and free of grease — remove grit, oil, detergent residue, flaking paint and old sealant
2. Cut the nozzle tip and screw it onto the cartridge
3. Load into a caulking gun and apply in a steady bead
4. Tool and shape with a spatula dipped in mild detergent, if needed
5. Wipe away excess uncured sealant with a mineral-turpentine cloth; trim fully cured excess with a sharp knife

Application tips & warnings

• Mask for a clean line and remove tape before the sealant skins over
• Paint surfaces before applying sealant; follow the product data sheet
• Ventilate when used indoors
• Uncured sealant can irritate eyes and mucous membranes — flush with water and see a physician if needed; keep out of reach of children

Directions for use

1. Surfaces must be clean, dry and free of grease — remove grit, oil, detergent residue, flaking paint and old sealant
2. Cut the nozzle tip and screw it onto the cartridge
3. Load into a caulking gun and apply in a steady bead
4. Tool and shape with a spatula dipped in mild detergent, if needed

Application tips & warnings

• Mask for a clean line and remove tape before the sealant skins over
• Ventilate when used indoors; uncured sealant can irritate eyes and mucous membranes

Where to use

• Dry-hang joints for marble and granite curtain walls
• Joints between marble and other stone materials
• Bonding and sealing ceramic assemblies

Do not use

• As a structural sealant
• On surfaces that bleed oil, plasticizer or solvent, or on uncured / sulfurized rubber
• In unventilated spaces, or on surfaces in direct food or water contact
• Below 4 °C (39 °F) or above 40 °C (104 °F)
• On copper / copper-alloy substrates or painted surfaces (may crack or lift paint)
• On surfaces contaminated with lime powder, concrete dust or sand

Product features

• Free primer — bonds without a separate primer step
• Permanently elastic once cured
• No shrinkage, non-corrosive
• Available in sausage packaging and special colors